Betek Stako 0

Cement-based, thin repair mortar containing lime-free, polymer modified fillings developed to partially or fully correct, fill and repair a surface.

• Produced with fillers like Silica sand and calcite of Portland cement in line with DIN 1164 at the suitable sieve and particle size.

• Modified with special powder and polymer products against humidity and corrosion.

• The largest particle diameter is 0.2 mm. In a structure that can be used in 0.2 – 3.0 mm thickness at a single application. Provides a smooth polish. Does not crack, shrink, sag or sink during application.

• Ensures the smooth look of top paint or coat and increases its resistance by creating a very smooth surface.

• Recommended to use synthetic emulsion based Betek Lateks and water mixture to improve the characteristic properties of fresh hardened Stako 0. (1kg Lateks + 4kg. Water)

Application Surfaces

Used in repairing the superficial capillary cracks of mineral-based interior or exterior surfaces like concrete, exposed concrete, gas concrete and plaster that are formed later even though they were corrected before with rough cast, finish plaster of mineral-based special plasters. Used securely in filling gaps or holes up to 3 mm on such surfaces and creating smooth surfaces by correcting the dimension mistakes.

Consumption

The approximate consumption for every 1 mm thick coat is 1.5 - 1.8 kg/m2.

The specified consumption values are approximate. Since there will be differences based on the number of pores and holes on the surface, the precise consumption can only be determined at the end of the application.

Packaging

25 kg Kraft Bag