Betek Super Fleks Fuga

Cement-based, low water absorption, silicone additive, high water reppelent decorative joint filler for ceramic and tile joints up to 6 mm.

According to TS EN 13888 European Joint Gap Norm:

Dry Powder Density 0,9-1,1 ±0.05 gr/cm3

Water Mixing Ratio 6,0 – 7,0 lt

Abrasion Resistance ≤ 1000 mm³ Decreased Water Absorbency (after 30 minutes) ≤ 5 g Decreased Water

Absorbency (after 240 minutes) ≤ 10 g Compression Resistance ≥ 15 N / mm²

Bending Resistance ≥ 3.5 N / mm²

Application Time Max. 1 hour

Hardening Time 12 hours

Time before Opening the Floor to Traffic Min. 24 hours

The above specified figures are valid for 23±2 °C temperature and 50±5% relative humidity. The time shortens at hotter conditions and extends at colder conditions

APLICATION SURFACES

Used in filling the joints of tiles, ceramics and similar coating materials

PACKAGING

20 kg Craft Bag