Betek Aquaset

An acrylic copolymer resin-based, water-based, single-component, ready-to-use, elastic, white (colorable) waterproofing spread material that can be applied on all types of surfaces easily.

Form: Semi-fluid liquid

Color: White

Density: 1.29 ± 0.05kg/L

Breaking elongation: min. 600 %

Adhesion strength: 12 kgf/cm2

• Ready to use.

• Easy-to-apply semi-fluid. Covers tough surfaces easily. Low labor cost.

• Elastic. Elongates 600% after 24 hours at 23°C in 1 to 1.5 mm thickness.

• Adheres perfectly to all types of building materials.

• (Adhesion strength on mineral based surfaces: 7.15 kgf / cm2).

• Maintains its elasticity in temperature differences (476% at 70°C, 397% at -17°C).

• Resistant against weak chemicals.

• Enables the surfaces to breathe.

• (Water vapor permeability: 27.6 g/m² day after 24 hours at 23°C and 65% relative humidity)

• Tensile strength: (23°C - 65% RH) 24.5 kgf / cm2 after 24 hours, 55 kgf / cm2 after 72 hours.

• Does not contain any solvents.

• Decorative. Can be colored with Betekmatic tubes even though it is produced white (only 4-5 shades) or painted using a water-based paint with the same elasticity.

Application Surfaces

Can be used on indoor or outdoor horizontal and vertical surfaces like flat and inclined roofs, terraces, balconies, pools and water tanks, corners of gutters, eaves and chimneys, and concrete, plaster, brick, zinc, galvanized and briquette surfaces.

Consumption

Depending on the structure, smoothness and porosity of the application structure, average consumption is 0.750-1 kg/m² in vertical and 1-1.5 kg/m² in horizontal per single coat.

The specified consumption values are approximate. Since there will be differences based on the number of pores and holes on the surface, the precise consumption can only be determined at the end of the application.

Packaging

20 Kg, 3 Kg, 1 Kg