Betek Fibrous Aquaset

Betek Fibrious Aquaset is a ready-to-use, polypropylene micro fiber-added, white, liquid membrane waterproofing material that is developed for regions named as risky in waterproofing.

Adhesion Strength: 12 kgf / cm2 (after 24 hours)

Tensile Strength: 50 kgf / cm2 (after 24 hours)

Breaking Elongation: 300 % (DIN 53455)

Water Vapor Permeability: 27.6 g / m² day (23°C and 65% HR)

Density: 1.3 gr / ml

• Enables applying waterproofing materials easily on top of cracks that occurred on old surfaces in time due to thermal reasons or settling.

• Removes the need for a new application by preventing the applied waterproofing system to be damaged due to the possible future macro-cracks.

• Provides more effective resistance against mechanical impacts with the additional strength that it gains thanks to the polypropylene micro fiber in its formula.

• Does not get affected from cold-hot differences. (-20°C ± 80°C)

• Can be painted only using a water-based paint with the same elasticity.

• Prevents the growth of bacteria thanks to the biocides in its formula.

• Provides perfect adhesion to mineral-based surfaces, wood and non-anodized metal surfaces.

Application Surfaces

Can be used safely especially on the joints or sections with cracking risk at concrete, plaster, brick, porcelain, galvanized sheet metal and wood surfaces requiring waterproofing like roofs, foundation and basement walls, and on filter and chimney bottoms.

Consumption

Depending on the structure, smoothness and porosity of the application structure, average consumption is 0.750-1 kg/m² in vertical and 1-1.5 kg/m² in horizontal per single coat.

The specified consumption values are approximate. Since there will be differences based on the number of pores and holes on the surface, the precise consumption can only be determined at the end of the application.

Packaging

20 Kg, 3 Kg, 1 Kg