Betek Polycrete

A cement- and acrylic-based, two-component, fully elastic waterproofing material.

• Highly adherent.

• Fully flexible and watertight.

• Resistant against mechanical impacts due to the flexible coat that it forms.

• Preserves its quality even in possible future capillary cracks on the application surfaces (up to 0.1 mm).

• Forms a permanent layer without any joints and attachments.

• Permeable to water vapor.

• Appearance/Color Component A: white liquid Component B: gray powder Mixture: cement gray

• Blending Ratio 20 kg powder (bag) - 10 kg liquid (pail) A/B ratio by weight: 1/2

• Density Powder: 1.35 ± 0.05 kg/L

• Fresh Cement Density: 1.70 ± 0.05 kg/L

• Water Absorption ≤ 0.1 kg/m²h0.5

• Pressurized Water Strength ≥ 1.5 bar (positive direction) Adhesion Strength ≥ 1.0 N/mm² (28 days)

• Surface Temperature +5°C - +30°C

• Ambient Temperature +5°C - +30°C

• Maturing Time: 3-5 minutes

• Working Life: 2 hours (at +20°C)

• Coat Resting Period: 4 hours

• Drying Time: 24 hours

Application Surfaces

Used in protection of all kinds of interior and exterior building elements and waterproofing. Used as a fully flexible waterproofing material in wet areas like restrooms, bathrooms and kitchens, water tanks (drinking water compliance certificate is available), foundations, terraces and balconies (to protect the top), and spaces where a lot of water is used like hot springs and Turkish baths. Cannot be used in areas exposed to negative water pressure.

Consumption

Component A + Component B: 3 kg/m² in average (2-coat application)

The specified consumption values are approximate. Since there will be differences based on the number of pores and holes on the surface, the precise consumption can only be determined at the end of the application.

Packaging

30 kg set (A+B)

Component A: 10 kg plastic pail

Component B: 20 kg craft bag