Betekstop

Cement-based, single-component crystallized waterproofing mortar with capillary effect that can be applied from negative and positive sides with polymer additives containing special type of cement and filling to provide solutions in situations like paint blistering and plaster flaking.

• Prepared by mixing with water only. Applied easily with brush or trowel.

• Used securely in waterproofing of horizontal and vertical surfaces both from negative and positive sides.

• Applied securely to all kinds of cement-coated surfaces, and all old and new brute concrete surfaces.

• Offers non-abrasive, non-corrosive full water insulation that can’t be passed and detached from the surface.

• Provides resistance against mechanical and chemical impacts. Protects the iron and concrete against abrasive effects of water.

• Color: Gray

• Powder Mixture Density: 1.4 ± 0.1 g/cm³

• Fresh Mortar Density: 1.5 ± 0.1 g/cm³

• Pressurized Water Strength: ≥ 1.5 bar (positive direction) Adhesion Strength: ≥ 1 N/mm² (28 days)

• Water Absorption: ≤ 0.2 kg/m² h1/2

• Compression Resistance: ≥ 15 N / mm²

• Bending Resistance: ≥ 5 N / mm²

• Working Life: 1 hour (at +20°C)

• Coat Resting Period: 5 hours

• Drying Time: 24 hours

Application Surfaces

Used in the insulation of foundations, curtain and sustaining walls at horizontal and vertical surfaces of indoors and outdoors, and basement walls of existing buildings. Used in pre-ceramic insulation of wet surfaces like balconies, bathrooms, WCs; in protection of concrete seaside buildings from the abrasive and corrosive effects of water; in protection against rain water entering with wind; in insulation of underground structures like storm drain, flume, tunnel, shelter, parking lot and elevator shaft; and in insulation of concrete water retaining structures like water tank, swimming pool and cistern.

Consumption

3 kg/m² in average (2-coat application) The specified consumption values are approximate. Since there will be differences based on the number of pores and holes on the surface, the precise consumption can only be determined at the end of the application.

Packaging

25 kg Kraft Bag