Bitumfleks

Modified bitumen emulsion-based, single-component, ready-to-use, solvent-free, water insulation spread material with high adhesion strength.

• Ready-to-use in fluid consistency.

• Provides high adherence to dry and moist surfaces.

• Prevents weathering, dusting and bloating on interior surfaces by providing water- and damp- proofing.

• Continues to protect the structure against water and damp without losing its watertight quality in possible future structural capillary cracks.

• Does not get affected from temperature differences when it gains its full strength (-15°C - +80°C).

• Color Dark brown (black when dried)

• Application Temperature +5°C - +30°C

• Solid Substance Ratio 58 ± 2

• Density (g/cm³) 1.06 ±0.02

• pH 9 ±1

• Viscosity (mPa.s) 20000 ± 2500

• Heat Resistance -15°C - +80°C

• Water Absorption 30 g/m²h1/2

• Water Vapor Permeability Sd< 0.10

• Breaking Elongation Min. 300%

• Tensile Strength 0.45 N/mm²

Application Surfaces

Used on horizontal and vertical surfaces of indoors and outdoors in the direction of the water like curtain and sustaining walls contacting the ground, tunneling, draining and piling, external insulation of basement and ground floor surfaces, and water insulation of wet areas like terraces, balconies, bathrooms, kitchens and rest rooms.

Consumption

3-4 kg/m² in average (2-coat application)

The specified consumption values are approximate. Since there will be differences based on the number of pores and holes on the surface, the precise consumption can only be determined at the end of the application.

Packaging

20 kg PE pail